Rear Mount; Positioning Engine Front Mounts; Engine Rear Support Cushion Assemblies - Dodge 2001 Ram 1500 Owner's Manual

9 - 44 ENGINE 3.9L
FRONT MOUNT (Continued)
(3) Lower engine with support/lifting fixture while
guiding the engine bracket/cushion and through-bolt
into support cushion brackets (Fig. 48).
Fig. 48 Positioning Engine Front Mounts
1 - ENGINE SUPPORT BRACKET/CUSHION
2 - SUPPORT CUSHION BRACKET
Fig. 49 Engine Rear Support Cushion Assemblies
(4) Install through-bolt nuts and tighten the nuts
to 102 N·m (75 ft. lbs.) torque.
(5) Lower the vehicle.
(6) Remove lifting fixture.

REAR MOUNT

REMOVAL
(1) Raise the vehicle on a hoist.
(2) Position a transmission jack in place.
(3) Remove support cushion stud nuts (Fig. 49).
(4) Raise rear of
SLIGHTLY.
(5) Remove the bolts holding the support cushion
to the transmission support bracket. Remove the sup-
port cushion.
(6) If necessary, remove the bolts holding the
transmission support bracket to the transmission.
INSTALLATION
(1) If removed, position the transmission support
bracket to the transmission. Install new attaching
bolts and tighten to 88 N·m (65 ft. lbs.) torque.
(2) Position support cushion to transmission sup-
port bracket. Install stud nuts and tighten to 41 N·m
(30 ft. lbs.) torque.
BR/BE
transmission and engine