Advertisement
All installations and services must be performed by qualified service personnel.
5. Move gas control switch to the "OFF" position.
6. Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow Step B in the
previous safety information. Go to the next step if you don't smell gas.
7. Move gas control switch to the "ON" position.
8. Replace combustion burner door.
9. Turn on electric power to the appliance.
10. Set thermostat to desired setting.
11. Follow the instructions "To Turn Off Gas To Appliance" and call a qualified heating
contractor or gas supplier if the appliance will not operate.
C. SHUTDOWN PROCEDURE
TO TURN OFF GAS TO FURNACE:
1. Set the thermostat to lowest setting.
2. Turn off the electric power to the appliance if service is to be performed.
3. Remove combustion burner door.
4. Move gas control switch to the "OFF" position.
5. Replace combustion burner door.
IV. HOMEOWNER/USER MAINTENANCE INSTRUCTIONS
(ROUTINE MAINTENANCE)
The following maintenance procedures should be performed by the homeowner/user during the
heating season.
: Homeowners attempting maintenance other than that covered as homeowner/user
maintenance may cause conditions which could result in personal injury or property damage.
Gas Control Valve
11
Advertisement
