Key Switch - PIAGGIO xevo 250IE User Manual

UNIT OF MEASUREMENT SETTING
Push (and hold for at least 3 seconds) the button "MODE" «R» and at the same time,
turn the ignition key to "on" .
The icons "kmi" and "°E" will start flashing.
"Kmi" represents the combination of "km" (kilometres) and "mi" (miles)
"°E" represents the combination of "°C" (degrees Celsius) and "°F" (degrees Fahren-
heit).
Pushing the "MODE" button «R» for less than a second, the icons "km" and "mi" are
selected in sequential manner.
Push the "SET" button «M» to confirm the selection.
Now the ambient temperature icon "°C" or "°F" starts flashing.
Pushing the "MODE" button «R» for less than a second, the icons " °C" and " °F" are
selected in sequential manner.
Push the "SET" button «M» to confirm the selection.

Key switch (01_07)

The key switch «A» is located on the front knee-guard panel near the bag hook.
SWITCH POSITIONS
ON«1»: Ready to start position, non-extractable key, mechanical antitheft device dis-
abled.
OFF «2»: Ignition disabled, extractable key, mechanical antitheft device disabled.
LOCK «3»: Ignition disabled, extractable key, mechanical antitheft device enabled.
01_07
14