Secura Key RADIO KEY 600 Quick Start User Manual page 3

Delete a Transponder by Entering Transponder ID: Delete a Transponder by Entering Transponder ID:
Delete a Transponder by Entering Transponder ID:
Delete a Transponder by Entering Transponder ID: Delete a Transponder by Entering Transponder ID:
(RKCM-01 cards or RKKT-01 Tags Only)
Enter Password. Press ENTER. Press VOID, Press
engraved on the Transponder, then press ENTER. A green light and beep means
the Transponder was deleted.
+
(VOID)
Add a PIN to the System: Add a PIN to the System:
Add a PIN to the System: Add a PIN to the System: Add a PIN to the System:
Enter Password. Press ENTER. Press ADD, enter the User Number, press ADD,
enter the 4-digit PIN Code, then Press ENTER.
+ 1 +
(User Number 14)
(ADD)
Change your Password: Change your Password:
Change your Password: Change your Password: Change your Password:
Enter your current Password. Press ENTER. Press
(exactly 5 digits). Press
green light and beep means the Password was changed. Note that 12345 is the
default (factory) password; use another number sequence for best security.
+ 5 + 4
+ 5 + 4
(Re-type New Password - 54321)
Set the Latch Timer: Set the Latch Timer:
Set the Latch Timer:
Set the Latch Timer: Set the Latch Timer:
Enter Password. Press ENTER. Press SET TIMER. Enter the number of
seconds (0-30). Press ENTER. A green light and beep means the Latch Timer
setting was changed.
+ 5 +
(5 Seconds)
(SET
Set the Operating Mode: Set the Operating Mode: TIMER)
Set the Operating Mode:
Set the Operating Mode: Set the Operating Mode:
Enter Password. Press ENTER. Press MODE, then press 1, 2 or 3 and press
ENTER. The Access Control Unit will exit Programming Mode and enter the
selected Mode. Selections are:
1. Active (Normal) -- LED is Off
2. Inactive (Reader Disabled)-- LED blinks Red
3. Door Unlocked -- LED blinks Green
+ 2 +
(MODE) (Mode No. 2)
+ 9 + 9 + 5 +
(ID Number 995)
4 + + 3
(ADD)
* again, then re-enter the new Password and press ENTER. A
(New Password - 54321)
+ 3 + 2
+ 3 + 2
(ENTER)
(ENTER)
(ENTER)
+ 2 +
5
(PIN Number 3253)
* , then enter the new Password
+ 1 +
+ 1 +
(ENTER)
* , enter the ID number
+ 3 +
(ENTER)