To Login; To Logout - NEC DT730 User Manual

TO LOGIN

When login mode is activated, following procedure is
required.
TIP: This feature is only available for DT700 Sereies.
Enter login code and press Set soft key.
(Station number is used as the Login code.)
:
Login ID
Password :
Cancel BK
Enter the password and press OK Soft key.
Login ID :
Password :
Cancel BK
If the login code is accepted, display changes to
normal idle status.
15:39 AM MON 18 JUL 2007
MIC DND
2000
Set OK
2000
*****
Set OK
>>>

TO LOGOUT

Press the preassigned Logout Feature Key on the
terminal.
TIP: This feature is only available for DT700 Sereies.
TIP:
This location is an example.
TIP: Logout button is assigned by data setting at the
ECP (Enterprise Communication Platform).
15:39 AM MON 18 JUL 2007
MIC
"LOGOUT?" is displayed on the LCD of the termi-
nal.
15:39 AM MON 18 JUL 2007
L-OUT
Press the Logout Feature Key on the terminal
again.
76
DND >>>
LOGOUT ?
>>>