Feature Operation; To Originate A Call Using Speed Calling (One-Touch Speed Calling Keys) - NEC DT730 User Manual

5.
F
EATURE
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
Press the desired One-Touch Speed Calling key,
Speaker
or press key and One-Touch Speed Call-
ing key.
To program
(Available only on DT Series with One-Touch Speed
Calling key.)
Feature
Press key.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press Feature key again to save the number.
SPEED SET
4:26 PM TUE 13 APR 2004
To verify
Press Feature key.
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
O
PERATION
Note 1: To program a hook switch for transfer or feature
Note 2: To program a pause, press the
Note 3: To program a Voice Call, press
Note 4: One-Touch Speed Calling key for feature access:
94
Recall
activation, press
plays on LCD.)
digit other than the first digit. (– displays on LCD.)
dialing station number. (V displays on LCD.)
One-Touch Speed Calling key may be used as a
feature key by storing the UNIVERGE SV7000 fea-
ture access code. The features may be programmed
on a system basis by the Telephony Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
key as first digit. (! dis-
Recall key as any
Transfer key after