Call Back - NEC DT730 User Manual

Using the Soft Key
Lift handset or press
Tone.
Press FDL Soft Key; receive service set tone.
Dial destination station number; receive service set
tone.
"Logged Out IP Station – Call Destination" lamp
goes off and FDL indication disappears on the
LCD.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
MIC

CALL BACK

If Called Station is Busy
Press CALL BACK. Receive service set tone.
CALLBACK SET
4:26 PM TUE 13 APR 2004
– Or –
Press the FLASH key and enter "Call Back" access
code.
When both parties become idle, calling party's
phone rings. Calling party would go off hook and
Speaker key; receive Dial
>>>
Called party
2000
hear ring back tone.
The called station would then be ringing.
CALLBACK
4:26 PM
Connection is established when the called party
answers.
CALLBACK
4:26 PM
Note:
Call Back may be programmed by the Telephony
Server Admin. on a Programmable feature key or
by the user on a One-Touch Speed Calling key.
Using the Soft Key
Press CB Soft Key and receive service set tone.
"CALLBACK SET" is displayed and the CB Soft
Key flashes on the display.
CALLBACK SET
4:26 PM
MIC
115
Called party
2000
TUE 13 APR 2004
Called party
2001
TUE 13 APR 2004
TUE 13 APR 2004
>>>