4 Menu Structure
4.1
Temperature Setup Menu
F1
TEMP SETUP
F1
SCAN <change the scan rate and enable alarms>
SCAN RATE: <edit>
STABLE LIMIT: <edit>
STABLE ALARM: (ENABLE/DISABLE) <select>
F2
IRT <set display emissivity to match IR thermometer>
IRT : <edit>
F3
CUTOUT <modify hard and soft cutout>
SOFT CUTOUT: <edit>
HARD CUTOUT: <view only>
Hot Keys
SETPoinT Key -
ºC / ºF Key
-
Up/ Down Arrow Keys <contrast adjust> <toggle>
Up Key:
Down Key: Darker
F1 & F4 Keys (same time)
F1 & F3 Keys (same time)
Figure 5 Temperature setup menu
4180/4181 MAIN MENU
F2
PROG MENU
SYSTEM MENU
SET TEMPERATURE SETPOINT
SETPOINT:
<set point temperature> <edit>
ENTER <enable control of the instrument>
F1 – SELECT PRESET <1-8> <select>
F1 – EDIT PRESET <1-8> <edit>
F4 – SAVE/DISABLE <disables control of the instrument>
Units: <°C, °F>
Lighter
eset to English language>
<r
urn off key press beep>
<t
Menu Structure
Temperature Setup Menu
F3
VIEW TEMP
F4
19