V.p. Functions Assignable To The Pedals; Special Midi Controllers Associated To The V.p; Loading Midi Files Containing A Vocoder Track - GEM Equinox Operating Instructions Manual

V.P. functions assignable to the Pedals

Under SYSTEM CONTROLS, two important Vocal Proc-
essor functions can be assigned to the pedals for foot con-
trol:
• Vocal On/Off (switch control)
• Vocal Volume (Continuous control)
The pedal assignment can be memorized to the Perform-
ances.

Special Midi Controllers associated to the V.P.

To control the Vocal Processor via MIDI, the following new
special MIDI controllers (Common Channel) have been
implemented:
Cntrl No. Description
12 Vocal volume
13 Vocal On/Off
14 Mode recall
85 Voice Mute mode 0 = Voice 1

Loading MIDI Files containing a Vocoder track

When a MIDI File containing a Vocoder track is loaded from
disk, the Vocoder track sets to track 5 by default.
Value
0 ... 127
0 Off/On (toggle)
64-127 On
1 - Vocoder mode
2 = Unison
1 = Voice 2
2 = Voice 3
3 = Voice 4
4 = Harmony
Vocal Processor 13