Singing Or Playing Through The Mic/Line Inputs - GEM Equinox Operating Instructions Manual

Note: If you are not using
the Vocal Processor, deacti-
vate it by setting the Vocal
Proc parameter to OFF.
Effect types: The effect
types (Reverb, MultiFX,
ProEFX) affecting the signal
will depend on the current
Performance being used.
12 Vocal Processor

Singing or playing through the Mic/Line inputs

If you want to sing or play though the Equinox to exploit
the instrument's internal Digital Effects Processors, you can
set appropriate parameters for both the In1 and In2 Mic/
Line inputs.
From the MIC/LINE INPUTS screen, press IN1 or IN2 ac-
cording to which input you are using.
This screen provides several parameters which affect the
signal on its way to the outputs.
Volume: Adjusts the Volume of the signal.
Pan: Varies the pan position of the signal.
Reverb Send: Adjusts the amount of Reverb to apply to
the signal.
MultiFX Send: Adjusts the amount of MultiFX to apply to
the signal.
ProEFX Send: Adjusts the amount of ProEFX to apply to
the signal.
Filter Type: Applies one of the following filters to the
signal: Low Pass, High Pass, Band Pass,
Parametric Boost, Parametric Cut.
Resonance: A filter control which affects the signal's
tonal character by introducing complex
harmonic overtones.
Cut-Off: Another filter control, usually used com-
bined with Resonance, which "opens" and
"closes" the filter to change the tonal char-
acter of the signal.
Analog Out: Selects the outputs from the following set-
tings: Stereo L + R, mono 1 + 2, 1 or 2.
Note: The Input settings remain memorized even after
turning the instrument off.