Setting The Harmony Master Volume - GEM Equinox Operating Instructions Manual

NOTE: At any moment, you
may want to store the set-
tings to the current Perform-
ance. Use the Store Per-
formance procedure ex-
plained in the Performance
Mode chapter of your Equi-
nox owner's manual.
8 Vocal Processor
Select the Vocal P. button, (F3) to enter the VOICE 1 screen:
Here you have the Voice parameter to turn the voice off or
on, the Volume parameter to adjust the Volume and the
Pan parameter to change the position of the voice within
the stereo panorama.
Using the VOICE + button, F3, you can select the other 3
voices and program the corresponding parameters inde-
pendently.
Voice 2
Voice 4
The default settings of all 4 voices is ON.

Setting the Harmony Master Volume

After the Voice 4 screen, pressing the VOICE + button,
(F3), again opens the Vocal Processor Harmony screen
where you can adjust the overall volume of the Vocal Proc-
essor.
Use the VOICE – button, F2, to step backwards.
Voice 3