Canon imageRUNNER 2320 Copying Manual page 43

● If you want to copy in Manual Density mode:
❑
Press (Density).
The Density menu appears.
Density
Auto Density
Manual Density
Density
Auto Density
Manual Density
Start to copy
100% Auto
Density: +2
ImgQual.: Text
2-Sided: Off
The density has been set.
For other settings and the further procedure, see steps 6 to 9 of "Basic Copying,"
on p. 1-10.
❑
Use [ ] or [ ] to select <Manual
Density>.
❑
Use [ ] or [ ] to set the desired density
➞ press [OK].
Press [ ] to move the indicator to the left
to make the density lighter, or press [ ]
to move the indicator to the right to make
the density darker.
NOTE
You can adjust the density within nine
levels.
The selected mode is set, and the LCD
1 display returns to the Standard Settings
menu.
NOTE
The density setting is displayed in
number such as '-1' or '+3', ranging from
-4 to +4, on the standby display.
Adjusting Density and Image Quality
1
1-31