Canon imageRUNNER 2320 Copying Manual page 41

NOTE
For details about the size and type of paper you can load into the stack bypass, see
Chapter 2, "Basic Operations," in the Reference Guide.
1
Place your originals.
2
Press (Paper Select).
The Paper Select menu appears.
3
Paper Select
Auto
Stack Bypass
A4
A4R
NOTE
• If there is no paper in the paper source that you have selected, a message prompting you
to load the paper of the appropriate size appears on the LCD display. You cannot start
copying until you load the paper or select a different paper source.
• The paper sizes are displayed in the order in which they are loaded in the paper drawers.
• The suffix 'R' (such as in A4R), used in paper size designations, indicates that the paper
is horizontally loaded in a paper drawer or the stack bypass.
• If you have not specified the paper size and type for the stack bypass using the
Additional Functions menu, a message prompting you to specify them appears on the
LCD display when you select the stack bypass as the paper source. (See Chapter 3,
"Useful Functions and Settings," in the Reference Guide.)
4
Press (Start).
Copying starts.
NOTE
To cancel all settings and return to the Standby display, press
Use [ ] or [ ] to select the paper
source.
Selecting the Paper Size
(Reset).
1-29
1