2680A/2686A
Users Manual
Testing and Troubleshooting
Use the following testing procedure to check the operation of the 2680 Series
instruments. Troubleshooting suggestions provide help to identify problems. See
Appendix I for additional troubleshooting information.
Installing and Testing the Installation
This test procedure includes opening Fluke DAQ software, configuring and
verifying communications with the instrument. Refer to Chapter 3 for detailed
instructions for configuring and communicating with instruments using Fluke
DAQ software.
This procedure assumes that you have performed the following relevant steps
described earlier in this chapter:
•
Setting line frequency and network parameters on the instrument if the
defaults are not applicable
•
Installing an Ethernet adapter in your host computer
•
Interconnecting the host computer and the instrument
•
Installing Fluke DAQ software
2-54