Wan Connection - D-Link DIR-620 Quick Installation Manual

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620

3G WAN Connection

1. Go to the Net / Connections page and click the Add button.

2. In the General settings section, specify a name for your connection

(any name for easier identification) in the Name field and select the 3G

value from the Connection Type drop-down list.

3. In the Physical layer section, select the USB value from the Physical

interface drop-down list.

In the PPP Settings section, enter authorization data provided by your

operator (the username (login) in the PPP Username field and the

password in the Password and Password confirmation fields), or

select the Without authorization checkbox if authorization is not

required.

5. In the APN field, enter the access point name, and in the Dial number

field, enter the number dialed to connect to the authorization server of the

operator.

6. Click the Save button.

7. On the Net / Connections page, select the choice of the Default

gateway radio button corresponding to the new 3G WAN connection.

Quick Installation Guide

Table of Contents