Crown 2/300 Operation Manual page 30

NOTE: Devices are not discoverable at the IP or HiQnet level. A device which is not discoverable at the IP level (invalid IP address, etc.) or HiQnet
address level (HiQnet address conflict, etc.) will not be able to report its class name. In this instance, the Device Type field will display a "?" to indicate
that the field may exist but that the software does not have enough discoverability of the device to determine the value. A blank field or "-" implies the
value is null.
9� Device Name
The user-definable Device Name is displayed here, as reported by the discovered device.
NOTE: This field may be edited inline if you want to change the Device Name. This field may not be edited for discovered PCs running an instance
of HiQnet software.
NOTE: Devices are not discoverable at the IP or HiQnet level. A device which is not discoverable at the IP level (invalid IP address, etc.) or HiQnet
address level (HiQnet address conflict, etc.) will not be able to report its Device Name. In this instance, the Device Name field will display a "?" to
indicate that the field may exist but that the software does not have enough discoverability of the device to determine the value. A blank field or "-"
implies the value is null.
NOTE: Once edits have been made, it is critical to click the Apply Current Edits or Apply and Exit buttons for the changes to take affect.
Container : Position
The Container and Position Venue Data is displayed here (separated by a colon), as reported by the discovered device. The field is left blank for
discovered PCs running an instance of HiQnet software. HiQnet software programs include System Architect, Audio Architect, and Performance
Manager.
TIP: A selected device may have its Venue Data cleared (including all Building, Floor, and Room Venue data) by pressing the Clear Container
button. This action takes place on applying current edits only and can be undone with the Undo Current Edits button.
NOTE: The Container/Position Venue Data may not be edited inline.
NOTE: Devices are not discoverable at the IP or HiQnet level. A device which is not discoverable at the IP level (invalid IP address, etc.) or HiQnet
address level (HiQnet address conflict, etc.) will not be able to report its Container : Position data. In this instance, the Container : Position field will
display a "?" to indicate that the field may exist but that the software does not have enough discoverability of the device to determine the value. A blank
field or "-" implies the value is null.
10� Locate
The Locate feature allows a device to be easily identified within a network full of HiQnet devices. Clicking in the Locate column for a device will put
the corresponding networked device into a Locate state — the Locate icon will be displayed on-screen and something will happen on the device
to indicate the Locate state is active (e.g., an LCD or LED will flash, etc.). Clicking an active Locate icon will disable the Locate state for the device.
Disabling the Locate state from the device will clear the icon. Devices may be put into a Locate state independently from selection so that more than
one device can be located at any one time.
Page 28
Installing Audio Architect & Configuring the Network
CDi DriveCore Series Operation Manual