CONFIDENTIAL
5.2.3 Removing the J Guide Assembly B (Cutter Blade)
Disassembly
Step
1
2
3
4
5
5-4
• Remove the Printer mechanism assembly from the Case-Main by performing Main Assembly 5 to 10
in Section 5.4.3 in reverse.
• Push the Lever-Ribbon frame in the
direction).
• Remove the J guide assembly B and Guide-Mask fastening screw.
• Remove the V feed roller assembly fastening E-ring; then remove the roller assembly from the printer.
• Remove the J guide assembly B.
Disassembly Procedure
1 direction, and open the Ribbon frame assembly (
2