The Belkin Advanced Secure Headset Adapter is the perfect security solution in cases where the classification of the User Manual computer is lower than the classification of the call made. The Belkin Advanced Secure Headset Adapter protects audio input devices such Important Security Note:...
The wall-mount power supply used with this product should be the model supplied by the manufacturer or an approved equivalent provided by Belkin or an authorized service provider. The use of an improper power source will void product warranty. Belkin Advanced Secure Headset Adapter User Manual ®...
SECTIONS Table of Contents Security Features The Belkin Advanced Secure Headset Adapter is a unique and secure Active Always-On Anti-Tampering product used to protect audio devices. Below is a summary of some key Active always-on chassis anti-tampering system prevents the Belkin...
Clear Indication The Belkin Advanced Secure Headset Adapter is equipped with active The Belkin Advanced Secure Headset Adapter has the ability to extend diode circuitry to assure that audio is passed in the right direction and the time interval of the microphone while the audio quality is not affected is not distorted or attenuated.
User Operating-System (OS) Support User Audio Devices The Belkin Advanced Secure Headset Adapter is compatible with The Belkin Advanced Secure Headset Adapter is compatible with the computers running on the following OS platforms: following types of user audio devices: Windows ®...
OVERVIEW SECTIONS Table of Contents Required Cables for Advanced Secure Headset Adapter Setup Connected Devices Not Included Belkin Advanced Secure Headset Adapter User Manual ®...
Page 9
OVERVIEW SECTIONS Table of Contents F1DN002A Front Panel Features Microphone Disable Push-Button + Red LED Microphone Enable/Extend Push-Button + Green LED Tamper-Evident Label Belkin Advanced Secure Headset Adapter User Manual ®...
Page 10
OVERVIEW SECTIONS Table of Contents F1DN002A Back Panel Features Audio Cable Jack (to PC) Admin LED (bi-color green/red) Microphone Cable Jack (to PC) Microphone Jack Power Supply DC Jack Audio Jack Belkin Advanced Secure Headset Adapter User Manual ®...
Page 11
Belkin Technical Support and avoid IMPORTANT NOTICE: using the product. If for any reason the tamper-evident label is missing, appears disrupted, or looks different than the example shown here, please call Belkin Technical Support at (800) 282-2355. Belkin Holographic Tamper-Evident Label Belkin Advanced Secure Headset Adapter User Manual ®...
OVERVIEW SECTIONS Table of Contents Specifications Part No. Storage Temp F1DN002A -4° to 140° F (-20° to 60° C) Enclosure Impact-resistant ABS plastic Humidity 0-80% RH, non-condensing Power Requirements 5V DC, 0.3A (maximum) Warranty 3 years AC Input Voltage Dimensions...
The location of your computers in relation to your device. was not accessed or tampered with during delivery. If the packaging The length of the cables used to connect the computer to the seal looks suspicious, contact Belkin Technical Support and do not use device. the product.
SECTIONS Table of Contents Connection and Installation Connect the audio cable pink plug to the Belkin Advanced Secure Connect the headphone or speaker device to the Belkin Advanced Headset Adapter’s input microphone jack (pink color jack) and the Secure Headset Adapter’s output headphone green jack.
LED on the rear end panel is LED will start blinking slowly and the audio output device will start illuminated in green to indicate that the Belkin Advanced Secure generating audio beeps during the last 15 seconds of the time Headset Adapter is ready to use.
Page 16
When the lowest or the highest volume levels are reached, 2 beeps will be heard. Please note: A microphone device is not mandatory when operating the Belkin Advanced Secure Headset Adapter. The product can be operated with just headphones or speakers connected.
Page 17
OPERATION SECTIONS Table of Contents Belkin Advanced Secure Headset Adapter LED Indications Table Product State Red LEDs Green LEDs Audio Indication Bi-Color Admin LED Idle – Powered on after self-test passed None Green Self-test failed None Product tampered Blinking fast alt...
Check that the wall-mounted power supply DC plug is connected to the If audio is heard but no beeps are heard: Belkin Advanced Secure Headset Adapter’s DC jack and that the wall- Check the volume level of the Belkin Secure Headset Adapter mounted power supply is connected to the main’s outlet.
ELECTROMAGNETIC COMPATIBILITY Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, assembly, material, or workmanship.
Page 20
Table of Contents What is not covered by this warranty? All above warranties are null and void if the Belkin product is not Belkin reserves the right to review the damaged Belkin product. All provided to Belkin for inspection upon Belkin’s request at the sole...
Page 21
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
SECTIONS Table of Contents Reporting Belkin Product Security Vulnerability If you are aware of potential security vulnerability with any Belkin Government product, we encourage you to contact us immediately at the following email address: gov_security@belkin.com or our technical support line at: 1-800-419-5546 After your communication is received, Belkin Government personnel will contact you to follow up.