Volume Level Control; Bass Control - Audiovox Rampage ACD-28A Owner's Manual And Installation Manual

OPER OPERA A A A A T T T T T ING INSTRUC OPER ING INSTRUC ING INSTRUC ING INSTRUCT T T T T IONS
OPER OPER ING INSTRUC
34
3
4
5
6
7
2
1 1 1 1 1
ON-OFF POWER BUTTON
Press this button to turn the unit on and off
when the ignition switch is on. When the unit
is off, the Liquid Crystal Display (LCD) panel
will normally display the time-of-day. If the
radio is off when the ignition switch is turned
off, the POWER button must be pressed to
turn on the radio after the ignition switch is
turned on. If the ignition switch is turned off
while the radio is on, the radio will come on
automatically when the ignition switch is
again turned on.
2 2 2 2 2

VOLUME LEVEL CONTROL

To increase the volume level, rotate the
PUSH SELECT-VOL control clockwise (CW).
The volume will increase and the level will be
shown on the display panel from a minimum
of 00 to a maximum of 100. To decrease the
volume level, rotate the PUSH SELECT-VOL
control counterclockwise (CCW). The vol-
ume will decrease as shown on the display
panel. This control also includes the inte-
6
gral Select button
bass, treble, balance and fader levels as
IONS IONS IONS
IONS
19 20 BEHIND PANEL
CAR COMPACT DISC PLAYER/RECEIVER
A
1
13 27 23
35 39
3
for adjustment of the
32, 33
30
SUB
8, 10
24 25
26
40 41 36
16
4 5 6
, ,
described in
3 3 3 3 3
PUSH SELECT BUTTON (SEL)
This button is used to select the audio function
(bass, treble, balance, or fade) to be adjusted
using the Volume Level control
Select button once will set the unit for volume
adjustment (VOL will appear on the display panel).
Pressing the button additional times will select
bass adjustment (BAS on display), treble (TRB),
balance (BAL), or fader (FAD). The display will
automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
NOTE: If the BAS or TRB functions are set while
the Equalizer function (EQ) is active, the
Equalizer function will automatically revert
to the FLAT setting.
4 4 4 4 4

BASS CONTROL

To adjust the bass level, first select the Bass
mode by pressing the PUSH SELECT button
so the BAS indication appears on the display
panel. Within 5 seconds of choosing the Bass
mode, rotate the Volume Level control
14 28
31
29
11
12
21
22
37
38
15
18 17 9
7
, .
and
2
.
Pressing the
3
2
CCW or