Table of Contents
Advertisement
MPG100_Manual_G03_161009.ai 27 2016/10/9 16:17:43
MPG100_Manual_G03_161009.ai 27 2016/10/9 16:17:43
The Registration Memory feature can make your performance more easy
and efficient. It allows you to save virtually all panel settings to a
Registration Memory setting, and you can instantly recall custom panel
settings by pressing a single button.
Registering the Panel Setting
1.
There are 8 memory banks, and each bank has 4 memories (M1-M4).
Holding down the [STORE] button, then press one of the registration
2.
memory buttons: [M1] - [M4]. Notice that the new settings will
replace the previous memory data.
Note:
Press [STORE] and [M1] button then power on, the registration memory
will be reset to default.
Recalling the Registered Panel Settings
Press one of the registration memory buttons: [M1] - [M4]. It will instantly
recall the settings saved in the memory and set the control panel
accordingly.
C
M
Note:
Registration data cannot be recalled when the One Touch Setting
Y
function is on.
CM
MY
CY
CMY
Selecting a Registration Bank
K
1.
Press the [BANK] button. The LCD will display the bank number.
Use the data dial, [+/YES] or [-/NO] button to select a bank from 1
2.
to 8.
Accompaniment Freeze
When Freeze is switched on, style settings (style number,
accompaniment section, accompaniment volume, tempo, transpose,
chords, mixer, split point) will not change even when a registered
memory is recalled.
1.
Press the [FREEZE] button, the LCD will display FREEZE indicator.
Now the accompaniment parameters will not be changed when
recalling registered memory.
In freeze status, press the [FREEZE] button to turn off the freeze
2.
function. The freeze indicator on LCD will light off.
Register Memory
27
Advertisement
Table of Contents
