Twinova; Cmy Scale - Kurzweil MPG100 User Manual

MPG100_Manual_G03_161009.ai 13 2016/10/9 16:17:40 MPG100_Manual_G03_161009.ai 13 2016/10/9 16:17:40
Notes:
1. The metronome sound will start from the next beat if it is turned on
when the accompaniment is playing.
2. When the metronome is on, then start the accompaniment, the
metronome will match the beats of the accompaniment.
3. In recording, the metronome sound cannot be recorded.

Twinova

The twinova mode splits the keyboard into two independent areas,
which have the same pitch and voice, for the convenience of one-toone
teaching.
Press [TWINOVA] button to turn twinova function on. The "TWINOVA"
1.
indicator is lit. In twinova mode, dual voice and lower voice are
unavailable. The default split point is E3 (32). Press [TWINOVA] again
to turn off the function.
The upper voice selected before entering twinova will become the
2.
default voice for both areas. Use the data dial, the [+/YES], [-/NO]
button or the voice select button to select a voice.
3. In twinova mode, press [OCTAVE] button, LCD temporarily displays
the octave value of twinova. Now you can use the data dial, the
[+/YES], [-/NO] button to set octave value of twinova. The range of
octave is -1 to 1. Pressing [+/YES] and [-/NO] simultaneously will set
C
the octave value to its default setting: 000.
M
Notes:
Y
1. In the Demo and song mode, the [TWINOVA] button is invalid.
CM
2. Please refer to the Function Menu to set the split point.
3. The [OCTAVE] button is valid only in twinova mode. After changing the
MY
octave, notes falling out of the voice range may not sound.
CY
CMY
Scale
K
This function allows you to experience different stretched tunings when
you play certain genres of music that is not composed based on twelve
equal interval.
Press [SCALE] button repeatedly to turn the function on or off. The
1.
corresponding indicator will be lit or unlit.
Scale type and root key selection
2.
Press and hold the [SCALE] button to enter the scale setting menu.
The scale indicator keeps flashing. The default setting is "001 Pytha
C". You can press [+/YES], [-/NO] button to select a different scale
type. Press one of the C7-B7 keys to select a root key. LCD will
display the scale type and root key.
The piano has six types of scale, as shown below:
Number
1
2
3
4
5
6
Notes:
1. It will exit the scale setting if there is no operation in 5 seconds.
2. It will disable the scale function when it enters the song mode or demo
mode.
LCD Name
Pytha
Major
Minor
Mean Tone
Werck
Kirnberg
Playing Voices
The Default Split Point is E3
13