Table of Contents
Advertisement
U S I N G M E M O R Y C A R D S
You can use an AT-Attachment (ATA) memory card with the
appropriate device drivers to add memory to the printer. The card goes
in the printer's PC-card slot. The application treats the memory card
as another disk drive.
Memory cards are flash-based. They have a built-in processor to track
bad locations and maximize flash life (ensuring no location is
overused).
Available memory cards come in 4, 8, 20, and 40 MB sizes.
C o n f i g u r i n g M e m o r y C a r d s
The following procedure describes how to configure memory cards.
Refer to the Programmer's Manual for more information.
1.
Place the following files (located in the SDK's DOS sub-directory)
in the application disk image's root directory:
Name
ATAINIT.EXE
GENATA.CLB
CSALLOC.INI
CARDID.INI
SSELAN.EXE
CS.EXE
CSALLOC.EXE
ATADRV.EXE
CARDID.EXE
7/21/98
Description
Memory card partition utility.
Generic configuration library for the memory
card.
Initialization file for CSALLOC.EXE.
Initialization file for CARDID.EXE. This file
contains references to configuration libraries
(.CLB files) for the memory card. At a
minimum, this file must refer to GENATA.CLB.
SystemSoft Socket Services .
SystemSoft Card Services .
Sy stemSoft Card Allocation Module.
Memory card driver.
Memory card ID driver.
Using Memory Cards 2-1
2
Advertisement
Table of Contents
