Download Print this page

Fellowes jupiter 2 125 Quick Start Installation Manual page 6

Hide thumbs Also See for jupiter 2 125:

Advertisement

Available languages

Available languages

TROUBLESHOOTING
Problem
No glowing 'blue' Power on LED
Pouch does not completely seal
the item
Pouch is lost in the machine
Pouch is damaged after lamination Damaged rollers or adhesive on rollers
NEED HELP?
Let our experts help you with a solution.
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
STORAGE & CLEANING
Turning off the Machine – If the top power button is pushed, the machine will go into cool-down mode. The heaters will turn off, but
the rollers will still run until the unit reaches the desired temperature to turn off completely. This functionality reduces long term wear
and tear to the unit. Unplug the machine at the wall. The outside of the machine can be cleaned with a damp cloth. Do not use solvents
or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm
– run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning
sheets are used with the machine regularly. (Cleaning sheet order code #5320603).
6
Possible cause
Machine not switched on
Item may be too thick to laminate
Pouch is jammed
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
Solution
Switch on machine at right rear side and at wall
socket. Press power standby button
Maximum document thickness equals .03". Pass
through laminator a second time
Machine will automatically reverse the document.
If jam is not completely cleared Reverse button
will blink/flash. Press and hold reverse button
while pulling on pouch to completely remove
pouch.
Pass cleaning sheets through the machine to test
and clean rollers

Hide quick links:

Advertisement

loading