Prohibition Of Transmission (Silent Mode); Ccrp Set - JRC JHS-183 Instruction Manual

5.3.4.11 Prohibition of Transmission（SILENT MODE）
Select 11.SILENT MODE
This is used for intentional prohibition of transmission.
Caution：Normally, AIS is operated by regulated channels.
Ship's administrators must be responsible for any change.
S E T U P
7 . P A S S W O R D
▲
8 . P O S N D I S P
9 . S A R T T E S T
1 0 . L O N G - R A N G E
1 1 . S I L E N T
1 2 . C C R P S E T : O F F
2 / 2
When the AIS is prohibited from transmitting, there is always "RX" mark on the bottom line of screen.

5.3.4.12 CCRP Set

Select 12.CCRP SET, The use of CCRP (
The AIS will display the distance or compass direction on the basis of the CCRP setting.
S E T U P
7 . P A S S W O R D
▲
8 . P O S N D I S P
9 . S A R T T E S T
1 0 . L O N G - R A N G E
1 1 . S I L E N T
1 2 . C C R P S E T :
2 / 2
and enter password. Silent mode is available.
S E T : O N
S E T : O F F
S E T
M O D E : O F F
▼
Consistent Common Reference Point
S E T : O N
S E T : O F F
S E T
M O D E : O F F
O F F
▼
Select from ON or OFF with ▲ key or ▼ key.
OFF ･･･ Continue normal operation
ON ････ Prohibit from transmitting while selected.
Press ENT key to determine.
Select from ON or OFF with ▲ key or ▼ key.
OFF ･･･ Set AIS controller's position as the reference
point.
ON ････ Set CCRP for as the reference point
Press ENT key to determine.
) can be selected.
5-63