JRC JHS-183 Instruction Manual page 52

(4) REPLY
Select whether the response is requested or not.
1. Press ▲ key or ▼ key, "ON" or "OFF" can be selected.
2. If the response is requested, "select "ON".
If the response is not requested, select "OFF".
3. After the selection, press ENT key to set the REPLY.
(5) CH (Channel)
Select the channel for transmission
1. Press ▲ key or ▼ key, "AUTO", "A", "B", "A/B" can be selected.
2. If the transmission channel is set A, select "A".
If the transmission channel is set B, select "B".
If channels are set both A and B, select "A/B".
If "AUTO" is selected, the channel is fixed automatically.
3. After the selection, press ENT key to set the CHANNEL.
(6) NUMBER OF RETRY
Refer to Page 5-27 "e) NUMBER OF RETRY SETTINGS".
5-26