Table of Contents
Advertisement
VIVOTEK
Image settings
On this page, you can tune the White balance and Image adjustment.
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
White balance: Adjust the value for the best color temperature.
■ You may follow the steps below to adjust the white balance to the best color temperature.
1. Place a sheet of paper of white or cooler-color temperature color, such as blue, in front of the
lens, then allow the Network Camera to automatically adjust the color temperature.
2. Click the On button to Fix current value and confirm the setting while the white balance is being
measured.
■ In the manual mode, you can manually tune the color temperature by pulling the RGain and
BGain slide bars.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from 0% to 100%.
■ Contrast: Adjust the image contrast level, which ranges from 0% to 100%.
■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%.
■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.
■ Gamma curve: Default is Auto. Yu can also adjust the image sharpness level, which ranges from
0 to 0.45. You may let firmware Optimize your display or select a value to change the preferred
level of Gamma correction towards higher contrast or towards the higher luminance for detailed
expression for both dark and lighted areas of an image.
50 - User's Manual
Advertisement
Table of Contents
