Setup Wizard; Source Setup; Speaker Connection; Network Setup - Denon DN-500AV Getting Started

EnGlish DEutsch

Setup Wizard

When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
1
Language Select
Set the language for the instructions on
the television screen.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 76 "Language").
2

Speaker Connection

Connect the speakers for surround sound.
NOTE
Connections for speakers other than 5.1 channel or 7.1
channel speakers cannot be set using the Setup Wizard.
Select "Others", and then select "Skip" in "2. Speaker Connection" to proceed to "3. Source Setup".
(For details on the setting method, see m page 38 "Speaker installation/connection (Advanced
connection)".)
4
Français Español
Language Select
Please select the
English
language for the on
Español
screen menu.
Speaker Connection
Please select the
speaker configuration
to be used.
5.1ch
7.1ch
Others
5.1ch is the most
popular surround
system.
3

Source Setup

Set the connecting terminals for each
device to be set, and connect to the
terminals.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 78 "Input Assign").
4
Remote Setup
Configure the settings so that devices
connected to this unit can be operated
using the provided remote control.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 74 "Remote Setup Guide").
5

Network Setup

Configure to playback audio files saved
onto a computer or Internet radio.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 70 "Network Setup").
This completes the Setup Wizard.
Source Setup
Please select device.
[1/2]
BD
DVD
TV
SAT/CBL
GAME1
GAME2
Remote Setup
Please select the
[1/3]
device you want to
Blu-ray
control.
CABLE
CABLE/PVR
CD
CD Recorder
DVD
Network Setup
Please connect LAN cable to ETHERNET port on
rear panel of receiver, and other side of
cable to network router.
Press [ENTER] to next when you finish
connection.