BATTERY INSTALLATION
Before attempting to operate your Remote Control,
install the batteries as described below.
1) Turn the Remote Control face down. Using a
fingernail, lift the battery cover off.
2) Install two "AAA" batteries as shown. Make
sure that proper polarity (+ or -) is observed.
3) Align the cover tabs with the remote control
and press down until the cover clicks.
The remote control will operate the VOD806 and
Audiovox VCP's. It is not a universal remote control
and will not control equipment from other
manufacturers.
REMOTE CONTROL OPERATION
-4-
EJECT
POWER
ON/OFF
Enter
128-6258
7 of 28