LG 32LX570H Commercial Mode Setup Manual page 25

Installer Menu Items 073 through 122
Item Function
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
086 V. MUTE TIME
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 HDMI2 ENABLE
092 HDMI3 ENABLE
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
097 AUDIO OUTPUT
098 PRO:CENTRIC
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
118 POWER SAVINGS
119 DATA CHANNEL
121 UPDATE TIME HR
122 UPDATE TIME MN
206-4278
Value Range Default Value
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0 ~ 50 0
0, 1, 17 1
0 / 1 1
0 / 1 0
0 ~ 2 1
0 ~ 2 1
0, 1, 2, 5, 6 0
0 / 1 1
0 ~ 4 2
0 ~ 9 7
0 ~ 2 0
1 ~ 200, 255 255
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0
0 / 1 0
0 / 1 0
1, 3, 7 3
0 ~ 135, 253,
255
255
0 ~ 23, 128 128
0 ~ 59 0
Brief Description of Function
If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT
AVAILABLE" message is displayed if user attempts to direct tune a channel that
is not included in the channel lineup.
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Use to extend the normal video mute time during channel change.
Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB input.
Set to 1 to enable RGB input. Set to 17 for Auto Configure.
(Analog channels only) If set to 1, audio is muted if no signal is present.
If set to 1, all display panel joystick button functions are locked. IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 3.
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See
detailed descriptions.)
Set to 1 to enable SAP feature in Function Menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode.
Sets the level of the TV picture back lighting. (See detailed descriptions.)
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
(Analog channels only) If set to 1, video mutes (blank screen) when no
Set to 1 to restore the factory default settings of all Installer Menu items.
Determines the powered status of the embedded b-LAN module and the GAME
CONTROL/MPI port. (See detailed descriptions.)
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by
the Pro:Centric server as its data channel. Set to 255 to use Auto Search to find
the Pro:Centric RF channel. (See detailed descriptions.)
Sets the Wake For Update hour. The value "128" is displayed as "OFF." Directly
entering 128 turns the Wake For Update feature OFF.
Sets the minute for Wake For Update.
Installer Menu (Cont.)
Selects ATSC band.
power cycle.
signal is present.
25