Tcb Dip Switch S2 Settings; Installing The Power Cord - Paxar 656 / 636 User Manual

TCB Dip Switch S2 Settings

Installing the Power Cord

8 • Printer Setup
Memory Card Option Board (350016)
Diskless Rom Bd. (281164)
Thermal Control Bd. (351105)
Head Control Bd. (351106)
TCB DIP SWITCH S2 SETTINGS
1 DPI
2 DPI (Undefined)
3 MACHINE TYPE
4 MACHINE TYPE (Undefined) OFF = Default
5 JAM SENSOR
6 UNDEFINED
7 UNDEFINED
8 UNDEFINED
A power cord is shipped with each printer. The cord for 110 volt printers, will use
the standard three prong plug used in the U.S.A. A 220 volt printer and other 110
volt configurations must have the receptacle end of the connector removed and the
proper plug installed. It is the customers responsibility to have the plug and
alteration work done by a certified electrician. Paxar supplies printers to many
countries with many variations. Therefore we leave this to the customer to make the
proper selection for their country.
- Slot 5 (from back)
- Slot 4
- Slot 2
- Slot 1
OFF = 240
OFF = Default
OFF = 656
OFF = not installed
OFF = Default
OFF = Default
OFF = Default
Users Manual Model 656/636
ON = 300
ON =
ON = 636
ON =
ON = installed
ON =
ON =
ON =