Time Interval - GE LOGIQ 200 PRO Series Quick Start Manual

Time Interval

Measurement Measurement
Set
Set
t
LOGIQ 200PRO Series Quick Start
2234974–100 Rev. 0
Perform a time interval for calculations such as HR, PHT, and ET.
Press Measurement twice. A "
the cursor is in the M-Mode portion of the display.
Use the Trackball to move the cursor to the measurement start point. Press Set
to fix the first cursor.
Use the Trackball to move the end cursor to the measurement end point. Press
Set to complete the measurement.

" cursor with a vertical dotted line appears when
Quick Start 23