Performing Basic Measurements - GE LOGIQ 200 PRO Series Quick Start Manual

Performing Basic Measurements

Basic measurements are displayed on the monitor and not automatically entered into a report page unless a specific
measurement/calculation is selected from the sub–menu. The specific measurement/calculation can be chosen before or
after the basic measurement has been performed.
Scan the desired anatomy and press Freeze.
Press Measurement key. Type of the measurement can be chosen by pressing the
Measurement key.
Measurement
Key Pressed
(After Freeze key is pressed)
Once
Twice
Three Times
Quick Start 18
MODE
B
Distance
Ellipse
Tissue Depth
Trace/Circle
Gray Scale Echo Level
M
(with B)
Tissue Depth
(Distance)
Depth Difference
Time Interval
Time Slope
t
LOGIQ 200PRO Series Quick Start
2234974–100 Rev. 0