Circumference/Area - Ellipse (B-Mode) - GE LOGIQ 200 PRO Series Quick Start Manual

Circumference/Area - Ellipse (B–Mode)
Measurement
Set
Ellipse
Set
Quick Start 20
Perform a circumference/area using the ellipse method for calculations such as
AC, HC, LVAMd, LVAd and Volume.
Press Measurement once.
Use the Trackball to move the "
area to measure. Press Set to fix the start point cursor.
Use the Trackball to move the second cursor to the major axis measurement end
point. Press the Ellipse up/down arrow key. An ellipse having an initial circle
shape appears.
Use the Trackball to position the ellipse, as necessary, and to size the measured
axis. Press Set to complete the ellipse measurement and record the
circumference and area.

" cursor to either end of the major axis of the
t
LOGIQ 200PRO Series Quick Start
2234974–100 Rev. 0