Raised Seams; Parallel Raised Seams - Husqvarna ZIGZAG 1030 Operating Manual

I
Raised seams
Exchange
lihe
ordinar> needle for a twin needle andi
-_____-.---,-_________
be sure to see that it is pressed tip high into the
...
needle clamp. Change to the raised scam presser
Upper Under
foot (41 11 389) and fit the raised seam attach ment
side
side
(40 15 427) with its straight edge towards you, If you
- "[
wihto use a gimp cord, ay this under the raised
Iea
attachnmernt
whlen you
put it on. In order to--
prvnt the threads from becoming entangled. it isH
adIsbe to thread one at a time Place a spool of
'
iradon
each of the spool pins and thread on both
sides of the middle tension disc. For the rest you
thread as usual, of course one threa.d in each of
Ithe
needles.
Thnadjust the machine for straight stitching. The
•
L-"
t
hegto h asdsa
swdutdb en fI
I
i
the thread tension
-the
harder the thread tension
S
the higher the seam will be. If
you are using a gimp
cord, first pull it out well behind the presser foot
I and then it will on l be necessary to see that it runs
freel while you are sew•ing.
m•l
I
Parallel raised seams
IIf
yu w\ish
to
sew scXCeralt paallel
seams, you can
usce thle groov es on the hot torn of thle presser foot
us edge guides. Place thle previously sewn seanm to
I
lieheIleft
or to the righit of the one yotu are about to
sew and let the presser
foot
guide the work.
"
27