MAINTENANCE
Every 500 Hours
Replacing the Hydraulic Oil
Return Filter
Refer to page 112 "Replacing the Hydraulic
Oil Return Filter".
Replacing the Fuel Filter
¡ ¡ ¡ ¡ ¡ Do not smoke or permit open flames
while handling fuel or working on the
fuel system.
¡ ¡ ¡ ¡ ¡ Stop the engine in a well-ventilated
place and allow it to cool down before
performing maintenance.
¡ ¡ ¡ ¡ ¡ Clean up spilled fuel immediately.
< TB014 >
< TB016 >
1. Open the engine hood.
2. Close the cock (2).
3. Loosen the ring (3), then remove the case
(4), element (5) and the indicator ring (6)
< TB014 >.
4. Clean the case (4).
5. Assemble the new element and the
indicator ring (6) < TB014 > in the case
(4), then tighten the ring (3).
6. Open the cock (2) and bleed the air.
Refer to page 141 "Bleeding the air from
the fuel system".
123
WARNING
C4G023E