Assembling Your Breville Product - Breville juice fountain compact Instruction Booklet

ASSEMBLING YOUR BREVILLE PRODUCT

PAGE HEADER.....
1. Place the motor base on a flat, dry
surface such as a counter-top. Ensure
that the juice is turned OFF and the
power cord is unplugged.
2. Place the integrated pulp container
on top of the motor base. Locate the
integrated pulp container so that the
spout fits through the hole on the front
of the motor base.
3. Align the arrows on the Nutri Disc™ with
the arrows on the motor drive coupling
and push down until it clicks into place.
Ensure the Nutri Disc™ is fitted securely
inside the integrated pulp container and
onto the motor base.
10
4. Place the juicer cover over the Nutri
Disc™ and integrated pulp container.
The ridges of the rim of the juicer cover
should align with the small plastic wings
on the integrated pulp container. Lower
into position.
NOTE
The juicing cover can be positioned
in either of the plastic wings on the
integrated pulp container.
5. Raise the safety locking arm up and lock
into the two grooves on either side of
the juicer cover. The safety locking arm
should now be in a vertical position and
locked into place on top of the juicer
cover.
ASSEMBLING YOUR BREVILLE PRODUCT PAGE HEADER.....
6. Slide the food pusher down the feed
chute by aligning one of the grooves in
the food pusher with the small bump on
the inside of the top of the feed chute.
Continue to slide the food pusher down
the feed chute.
7. Place the juice jug provided sideways
under the spout of the juicer. A graphic
on the lid shows where the juicer spout
is to be placed.
NOTE
The jug is designed to clip in under
the spout to give it a positive location.
NOTE
A glass could also be used to collect
the juice, but using the jug and lid is
recommended to avoid any splatter.
11