Assembling Your Breville Product - Breville Froojie BJE520 Instruction Booklet

ASSEMBLING yOUR BREvILLE PROdUCT

BEFORE FIRST USE
Before using your juicer for the first time,
remove any packaging material and
promotional stickers and labels. Ensure the
appliance is switched off at the power outlet
and the power cord is unplugged.
Wash the filter bowl surround, Nutri Disc™,
juicer cover, Froojie™ Disc, Froojie™ insert,
food pusher, pulp container and juice jug
and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor
base can be wiped with a damp cloth. Dry
thoroughly.
FOR USE WITH JUICE ExTRACTOR
1. Place the motor base on a flat, dry
surface such as a bench top. Ensure that
the motor base is switched OFF at the
control panel, then switch the appliance
off at the power outlet and unplug
the cord.
2. Place the filter bowl surround on top of
the motor base.
BJE520_IB_C12.indd 11
3. Align the arrows at the base of the Nutri
Disc™ with the arrows on the motor
drive coupling and push down until it
clicks into place. Ensure the Nutri Disc™
is fitted securely inside the filter bowl
surround and onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute
over the juice disc and lower
into position.
11
27/09/12 1:43 PM