Differential (Air And Sail Types Only); V-Tail Differential (Air And Sail Types Only); Throttle Cut - Spektrum dx18qq Instruction Manual

Differential (Air and Sail Types only)

The Differential screen enables you to
increase or decrease the amount of dif-
ferential between aileron control surface
throws.
Positive Differential values decrease
the amount of "down" travel without
affecting the "up" travel on the opposite
control surface.
Negative Differential values decrease the amount of "up" travel without affecting
the amount of "down" travel on the opposite control surface.
The Differential menu option only appears when a multi-servo aileron wing type is
active in Aircraft Type.
To adjust the Differential:
1. Scroll to Switch and press the scroll wheel. Scroll right to select On (Differen-
tial is always on) or assign the differential to a switch position.
2. Press the scroll wheel a second time to save the selection.
3. Scroll to the percentage selection and press the scroll wheel once to change
the value.
4. Press the scroll wheel again to save the selection.

V-Tail Differential (Air and Sail Types only)

The V-Tail Differential screen enables
you to increase or decrease the amount
of differential between control surface
throws.
Positive Differential values decrease
the amount of "down" travel without
affecting the "up" travel on the opposite
control surface.
Negative Differential values decrease the amount of "up" travel without affecting
the amount of "down" travel on the opposite control surface.
The V-Tail Differential menu option only appears when V-Tail A or V-Tail B is active
in Aircraft Type.
To adjust the V-Tail Differential:
1. Scroll to Switch and press the scroll wheel. Scroll right to select On (Differen-
tial is always on) or assign the differential to a switch position.
2. Press the scroll wheel a second time to save the selection.
3. Scroll to Diff: and press the scroll wheel once to change the value.
4. Press the scroll wheel again to save the selection.

Throttle Cut

The Throttle Cut menu option enables
you to assign a switch position to stop
an engine or motor. Throttle Cut acti-
vates regardless of Flight Mode.
When you activate Throttle Cut,
the throttle channel moves to the
pre-programmed position (normally Off).
You may need to use a negative value to move the Throttle channel to the off
position.
CAUTION: Always test the model after making adjustments to make sure
the model responds to controls as desired.
38
EN
SPEKTRUM DX18QQ