®
Invacare
- TDX-SP / TDX-SP N
●
Undo the two cap nuts (1) with an 8 mm socket spanner and remove the cap nuts complete
with washers.
●
Replace the rear light.
Dismantling the bulbholder:
●
Refit the parts in reverse order.
●
Check all vehicle functions.
8.7.6
Replacing the rear bulbholder
Requirements:
● Phillips screwdriver size 2
● socket spanner, 8 mm
● socket spanner, 13 mm
Dismantling the bulbholder:
●
Remove the complete rear light as described in Chapter 8.7.4.
●
Undo the two retaining screws (2) with a 13 mm socket spanner and remove the screws
complete with washers.
●
Replace the bulbholder (1).
Refitting the bulbholder:
●
Refit the parts in reverse order.
●
Check all vehicle functions.
SERVICE MANUAL
71