Sicam Cmic As Telecontrol Substation - Siemens SICAM CMIC User Manual

Use Cases
F.1

SICAM CMIC as Telecontrol Substation

Features:
·
Communication with the control system via IEC 60870-104
·
1 IP address
·
1 subnet-mask
·
1 default router
·
Communication to the process with local peripherals or serial communications protocols
(e.g.: MODBUS, ...)
·
Parameter
address (connected ports in switch mode)
In this configuration SICAM CMIC can be reached with the set IP address via both Ether-
net interfaces (X1 or X4). The unused port is not deactivated.
Office Zone
Control Center Zone
Substation Zone
396
Network settings | IP address | Mode of Ethernet ports
SICAM CMIC
Process
Control Center
IP-address:
Subnet mask: 255.255.0.0
Router
IP-address: 172.16.0.254
PREx / ET84
IP-address: 172.16.0.3
X1
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
X4
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
= 1 IP
172.17.0.22