Evacuation system
22
6.5 Exhaust dimensioning
It is important that the machine has correct air volume compared to each machines power.
If the air flow is smaller or larger this will result in a longer drying period.
The machine is designed to work with the maximum static back pressure according to the table in
the technical data section.
The exhaust duct must be designed so the static back pressure measured 1 m from the exhaust
outlet does not exceed the maximum allowable back pressure specified in Technical data.
If the outlet pipe is longer or the ventilation is not properly designed we recommend to clean the
outlet pipes periodically.
All cover panels must be mounted in order for the machine to work in the best way.