Table of Contents
Advertisement
Evacuation system
25
Alternative measuring meathod
Adjusting the dryer may only be carried out by authorized personnel.
Use a home made U tube manometer, a hose (max ⌀ 10 mm), with water. Insert one end of the
hose in the hole, hold the hose according to the picture so that the water is in level.
Start the machine and measure the difference between the water in one of the hose ends with
the other.
1 mm = 10 Pa.
⑱
fig.7528
When the dryer is adjusted remount the heating sensor (NTC sensor) (A) and lock the damper (B)
in the new position with the screws.
Remount the lower back panel.
Hide quick links:
Advertisement
Table of Contents
