Samsung X4220 Instruction Manual page 56

Samsung Multifunction MultiXpress X4220, X4250, X4300, X401, K4250, K4300, K4350, K401 Series
FDP_IFC.2.2 The TSF shall ensure that all operations that cause any information in the TOE to flow
to and from any subject in the TOE are covered by an information flow control SFP.
6.1.3.8 FDP_IFF.1 Simple security attributes
Hierarchical to: No other components.
Dependencies: FDP_IFC.1 Subset information flow control
FMT_MSA.3 Static attribute initialisation
FDP_IFF.1.1 The TSF shall enforce the [NAC Policy SFP] based on the following types of subject
and information security attributes: [security attribute of subject (External IT entities): IP/MAC
Address, security attribute of information (network packet): Service Port Number].
FDP_IFF.1.2 The TSF shall permit an information flow between a controlled subject and controlled
information via a controlled operation if the following rules hold: [
a) The source IP/MAC address should not match the IP/MAC filtering rule (blocking list)
registered by U.ADMINISTRATOR
b) The service port number of information should match the service port number registered by
U.ADMINISTRATOR ]
FDP_IFF.1.3 The TSF shall enforce the [none].
FDP_IFF.1.4 The TSF shall explicitly authorise an information flow based on the following rules:
[none].
FDP_IFF.1.5 The TSF shall explicitly deny an information flow based on the following rules: [none].
6.1.3.9 FDP_RIP.1 Subset residual information protection
Hierarchical to: No other components
Dependencies: No dependencies
FDP_RIP.1.1 The TSF shall ensure that any previous information content of a resource is made
unavailable upon the deallocation of the resource from the following objects: D.DOC, [D.FUNC].
Copyright

2014 SAMSUNG ELECTRONICS Co., Ltd., All rights reserved
56