Table of Contents
Advertisement
How to Use Main Body Operation Buttons
and Remote Controller
■ Turning ON/OFF the Power Button
The power switch at the left backside of the main body is connected between the battery and the Main circuit to
function to supply or block the power. Also, it is connected between the recharging connector of the main body
and the Main circuit to functions to supply or block the power of the recharging station.
When the main body power switch remains in ON state, the product can be turned on by pressing the button
on the main body, and recharge is possible. If the power is not turned ON even if the power button on the
main body is pressed, or if power is not turned on even if the main body is connected to the recharging
station, check the status of the main power switch at the left backside of the main body.
※ When you turn on the main power button, do not turn it on while pressing the button at the top of the cleaning
robot. Button operation may be delayed.
Even if the main body power switch is turned on, Micom does not operate, so there is no change is the status
indication window. To start Micom, press the start/stop button of the main body for 1 second after turning on
the main body power switch. Then, Micom will start, LED of the screen display window will be turned on, and
Booting will start. Booting time may be different for each model, and when the Booting is over, it converts to
standby state with a melody.
In the standby state, if the start/stop button of the main body is pressed for 2 seconds or longer, the power will
be turned off with the ending melody.
It is the state with the power off, but a small amount of electricity is used for button operation, so when it is left
alone for long period of time, the battery may be consumed and power may not be turned on. When it is not
used for long period of time, please store it with the power switch turned off.
-17-
Hide quick links:
Advertisement
Table of Contents
