Choose An Operating Mode - KVH Industries TracVision M7 Installation Manual

14

Choose an Operating Mode

If you are installing a circular system, choose the
appropriate operating mode for your customer's
satellite TV service provider and satellite
preferences (see Figure 32). You will select this
mode in the next step.
DIRECTV
Dual-Sat:
Select this mode if you wish to receive
programming from the 101 and 119 satellites for
DIRECTV service.
Tri-Sat or Tri-Sat Pairs:
Do not use either of these modes for a new
installation. The Tri-Sat Auto mode supports the
Tri-Sat AutoSwitch; the Tri-Sat Pairs mode
supports the HDTV Converter. These HDTV
devices are no longer available.
DISH Network
DISH 1000/61 or DISH 1000/129:
Select one of these modes for DISH Network's
three-satellite service (DISH 1000). Use the map
in Figure 33 to help determine the appropriate
DISH 1000 mode for your geographic area. Check
with DISH Network for local channels
availability.
DISH 500:
Select this mode if you wish to receive
programming from the 119 and 110 satellites for
DISH 500 service.
Bell TV (formerly ExpressVu)
Select the Bell TV service to receive Bell TV
programming from the 91 and 82 satellites.
Custom
If none of the above modes meets your
customer's needs, you may select any two
satellites from the antenna's built-in library using
the Custom service mode.
18
Circular Systems - Only
Figure 32: Satellites Tracked in Each Operating Mode
DIRECTV
Mode
Dual-Sat
Tri-Sat or Tri-Sat
Pairs (Not used)
DISH Network
Mode Satellites Tracked
DISH 1000/61 119, 110, and 61
DISH 1000/129* 119, 110, and 129
DISH 500 119 and 110
* Optional Master Receiver Selector (KVH part #72-0412)
required for automatic satellite switching; multiswitch
(KVH part #72-0310) required for manual switching; see
Appendix A on page 28.
Bell TV
Mode Satellites Tracked
Bell TV 91 and 82
Figure 33: Recommended Areas for DISH 1000 Satellites
= DISH 129 Satellite Recommended
= DISH 61 Satellite Recommended
Satellites Tracked
101 and 119
101, 110, and 119