Turn On The System - KVH Industries TracVision M7 Installation Manual
Master control panel configuration tapered baseplate version
Hide thumbs
Also See for TracVision M7:
- Installation manual (51 pages) ,
- Replacement instructions manual (13 pages) ,
- Replacement instructions (4 pages)
Table of Contents
Advertisement
13
Turn On the System
Follow these steps to turn on the TracVision
system.
a. Ensure the antenna has a clear, unobstructed
view of the sky so it can receive satellite
signals.
b. Apply power to the satellite TV receiver(s)
and TV(s).
c. Set the switchplate's power switch to the
"on" position to apply power to the
TracVision system (see Figure 31).
d. Wait one minute for system startup. When
the MCP display shows "Set up satellite(s),"
proceed to the next step.
Figure 31: Switchplate Power Switch
ON
OFF
17
Advertisement
Table of Contents
