Small Frame Gas Pump; Part 1 - Specifications And Views; Performance Specifications - Briggs & Stratton CE8070 Troubleshooting Manual

Hide thumbs Also See for CE8070:

Table of Contents

Portable Pressure Washer Familiarization and Troubleshooting Guide

Section 5 • Small Frame Gas Pump

This section describes the small frame pump assemblies powered by gasoline engines intended for use in light duty

applications. This small frame gas pump may also be referred to as 'GPW-EG' or 'EG' or 'Economy Gas' pumps. Most of the

information previously printed in publication A4453 will be found here.

The small frame gas pump has the following features:

• 1500 to 1800 PSI water pressure

• 2.0 Gallons per minute flow

• Axial Cam Design

• Stainless Steel Pistons

• Fixed Pressure Unloader

• Chemical Injection System available

• Thermal Relief Valve available

• Oil Bath Drive System

• Vertical or Horizontal Engine Mount

Part 1 - Specifications and Views

This section presents the torque and performance specifications for

gas pumps. Also presented are sectional and exploded views of this type of pump assembly.

Performance Specifications

Pump

Rated

Assembly

Pressure+

Part No.‡

B1906A

1500

20965

1650

20965A

1650

B1262

1750

B1262A

1750

+ Pressure (in pounds per square inch) is adjustable up to the unit's rated pressure.

* Flow rate is given in gallons per minute.

‡ 'A' suffix denotes pumps with thermal relief valve.

Pump assemblies are listed by part number and were current at time of publication. Other pump assemblies will become

available as our products evolve.