Oil Fill
Before filling the pump crankcase with oil, ensure that the
head screws, outlet port caps, and crankcase screws are
tightened to the torque value specified in the Torque Chart,
found on Figure 6.2 (Exploded View) at the beginning of this
chapter.
Referring to Figure 6.37, insert a funnel into the Oil
Fill/Breather cap threaded opening at top of the pump
crankcase. Add the amount and type of oil recommended in
the table in Part 2 of the Common Pump Components
section, earlier in this manual.
Figure 6.37 — Pump Oil Fill Location
Item
Name
1
Funnel
2
Breather cap
3
Assembled pump/crankcase
Portable Pressure Washer Familiarization and Troubleshooting Guide
72
Section 6 • Medium Frame Pump