Parrot 3400 LS-GPS User Manual page 8

PAIRING WITH YOUR MOBILe PHONe:
Using for the first time
The first time that you switch on the 3200 LS-COLOR, you must
pair your mobile phone with the kit.
. Enable the Bluetooth mode on your phone.
. On the hands-free kit, scroll through the menus until you come to
Settings Pair with phone..., and select the relevant option for your
phone. A 4-digit PIN code then appears on screen. Memorise it.
. Search for any peripherals: for further information on this proce-
dure, refer to the Bluetooth chapter in your mobile phone's user
guide or check out our website at :
www.parrot.biz/guide_chm/3200LS COLOR/index.html
. Once the search has finished, "Parrot 3200LS / Parrot 3400LS"
is displayed on your phone.
. Select the kit. Your phone prompts you to enter a code: key in the
code shown on the kit screen and confirm on your phone
. The kit's screen displays "Pairing".
. Once the data has been exchanged, "pairing successful"
appears on the 3200 LS-COLOR.
. The 3200 LS-COLOR then connects to your phone. Once the
connection has been made, the Bluetooth logo is displayed on the
screen (except for certain phones using the Headset profile).

. Some phones offer additional features, such as displaying your
phone's name on the kit's screen, as well as the battery and
signal levels and the operator's name.
You can now access the menus and their name is announced by
the hands-free kit when you turn the scroll wheel. Press the green
button (or the scroll wheel) to access the menus, and press the red
button to exit them.
You can now use your hands-free kit to make and receive calls.
. Receiving a call: press the green button to answer the call.
. ending a call: press the red button.
. Redial function: hold down the green key on the kit for two
seconds to redial the last number dialled.
. Adjusting the volume: turn the scroll wheel during a call to
adjust the volume.