Parrot 3400 LS-GPS User Manual page 14

PARROT 3400LS-GPS
The Parrot 3400LS-GPS kit features a built-in GPS module (Global
Positioning System) providing real-time information on the vehicle's
current position. This information is available by Bluetooth over a
channel that can be accessed by most PDAs and smartphones
equipped with navigation software.
Procedure for connecting to the GPS service
If a navigation application is installed on your PDA or smartphone,
simply pair your device with the Parrot 3400 and establish a
Bluetooth serial connection with the GPS port (the number of
the outgoing serial port to be used will depend on your PDA or
smartphone).
The configuration to be chosen on your device is NMEA 0183v2
9600 if prompted by your navigation software.
Several statuses may be encountered:
w Status 1: no GPS connected – No fix (satellite icon greyed
out)
w Status 2: no GPS connected – Fix (satellite icon coloured)
w Status 3: GPS connected – No fix (satellite icon greyed out,
with a transmission symbol)
w Status 4: GPS connected – Fix (satellite icon coloured, with a
transmission symbol)
Note: the fix indicates that the satellite data received by the hands-
free kit is valid.
14
PROCeDURe
for connecting to the GPS service:
1.If you are already connected via Bluetooth to your
phone:
w Disconnect your phone (hold down the red button on the
hands-free kit for two seconds). The hands-free kit then changes
to status 1 or 2 (if the fix is established).
w From your navigation software (installed on your PDA or
smartphone), connect to the GPS service of the 3400LS-GPS. The
hands-free kit then changes to status 3 or 4.
w Once connected, a transmission symbol appears beneath
the satellite. If the satellite icon is coloured, the fix is established
(hands-free kit in status 4). The distance travelled will then be
displayed in the top-right corner of the screen.
w Once the GPS connection is established, the kit automatically
reconnects to your phone's telephony service.
2.If you are not already connected via Bluetooth to
your phone:
w From your navigation software (installed on your PDA or
smartphone), connect to the GPS service of the 3400LS-GPS. The
hands-free kit then changes to status 3 or 4.
w Once connected, a transmission symbol appears beneath
the satellite. If the satellite icon is coloured, the fix is established
(hands-free kit in status 4). The distance travelled will then be
displayed in the top-right corner of the screen.
w You can now pair/connect your phone.